MODEL: MDP-100T
Lightning Surge Protectors for
Electronics Equipment M-RESTER
GENERAL SPECIFICATIONS
Construction: Plug-in
Surge protection type: Voltage limiting type one-port SPD
Connection: M4 screw terminals (torque 0.8 N·m)
Screw terminal: Nickel-plated steel
LIGHTNING SURGE PROTECTOR FOR
AC/DC POWER SUPPLY USE (1A)
(photovoltaic system, instrument shelter)
Functions & Features
Housing material: Flame-resistant resin (black)
INSTALLATION
• Designed for AC and specifically for DC power supplies up
to 1 A
Operating temperature: -20 to +80°C (-4 to +176°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Surface or DIN rail
• Beneficial for protecting instruments from
counter electromotive force by inductors and of course
normal lightning surges entering from power supply lines
• 1 A fuse incorporated in element circuit
Weight:
90 g (0.20 lb), standard
115 g (0.25 lb), with DIN rail mounting adapter
23.5 (.93)
PERFORMANCE
Max. line voltage (Uc): 120 V AC (peak voltage 170V)
Discharge voltage:
Lot.NO
N1430B
100
(3.94)
Line to line: 190 V
JPAN
MADEIN
Line to earth: 410 V
M•STER
MODEL
Voltage protection level (Up):
Line to line: 400 V
80 (3.15)
mm (inch)
Line to earth: 800 V
Response time: ≤ 0.1 μsec.
Leakage current:
Line to line: ≤ 0.15 mA @ 150 V DC
Line to earth: ≤ 0.15 mA @ 300 V DC
Max. discharge current (Imax): 1000 A (8/ 20 μsec.)
MODEL: MDP–100T[1]
ORDERING INFORMATION
• Code number: MDP-100T[1]
Specify a code from below for [1].
(e.g. MDP-100T/A33/Q)
Nominal current (I ): 1.0 A
N
Dielectric strength of the base module:
1500 V AC @ 1 minute (G terminal to other terminals)
Internal series resistance: ≤ 0.4 Ω (including return)
Surge protection: IEC 61643-1 Class III
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS (multiple selections)
DIN Rail Mounting Adapter
blank: Without
/A33: With adapter (model A-33)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
MDP-100T SPECIFICATIONS
ES-8226 Rev.2 Page 1/4
http://www.m-system.co.jp/
