5KP Series
Reverse Voltage: 5.0 to 440 V
Peak Pulse Power: 5000 W
Axial Lead
Transient Voltage Suppressors
Features
R-6/P600
●
Glass passivated chip
●
5000 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle):0.01 %
DIA.
1.000 [25.40]
MIN
0.052 1.32
●
Low leakage
0.048
[ ]
1.22
●
Uni and Bidirectional unit
●
Excellent clamping capability
●
Very fast response time
0.360 9.14
0.340 8.64
●
RoHS compliant
[
]
Mechanical Data
●
Case: Molded plastic
DIA.
0.360 9.14
0.340 8.64
●
Epoxy: UL 94V-0 rate flame retardant
[
]
●
Lead: Solderable per MIL-STD-202, method
208 guranteed
1.000 [25.40]
MIN
●
Polarity: Color band denotes cathode end
Dimensions :
inch [ mm ]
except Bipolar
●
Mounting position: Any
Maximum Ratings(TA=25℃ unless otherwise noted)
Value
Unit
W
Parameter
Symbol
Peak power dissipation with a 10/1000μs waveform(1)
PPP
IPP
PD
5000
See Next Table
8.0
Peak pulse current wih a 10/1000μs waveform(1)
Power dissipation on infinite heatsink at TL = 75 °C
Peak forward surge current, 8.3 ms single half sine-wave
A
W
IFSM
500
A
unidirectional only(2)
Maximum instantaneous forward voltage at 100 A for
unidirectional only(3)
VF
3.5/5.0
V
Operating junction and storage temperature range
TJ, TSTG
- 55 to +150
°C
Note:
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3)VF<3.5V for devices of VBR<200V and VF<5.0V for devices of VBR>201V
http://www.lgesemi.com
mail:lge@lgesemi.com
Revision:20170701-P1
