850 MHz Intel Celeron Real-Time Embedded Controllers for PXI
Specifications subject to change without notice.
Random vibration
Operating ........................................ 5 to 500 Hz, 0.3 grms
Features
(with solid-state hard drive)
Nonoperating.................................. 5 to 500 Hz, 2.4 grms
(tested in accordance with
Processor............................................. 850 MHz Intel Celeron
System memory (RAM)....................... 256 MB, 7.5 ns SDRAM (standard)
512 MB, 7.5 ns SDRAM (maximum)
Ethernet............................................... 10/100BASE-TX, RJ45 connector
Hard drive............................................ 40 GB minimum, internal 2.5 in.,
9.5 mm Fast Ultra
IEC-60068-2-64; nonoperating
test profile exceeds the
requirements of MIL-PRF-28800F,
Class 3)
ATA100 Interface
Safety and Compliance
Safety
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
Serial................................................... 1 (RS232)
Parallel ................................................ IEEE 1284, Type C Connector
USB .................................................... 2 x USB 1.1
Power Requirements
Current
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Voltage (V)
+3.3
+5
Typical
3.0
4.5
Maximum
4.0
6.0
Note: For UL and other safety certifications, refer to the product label or
visit ni.com/certification, search by model number or product line, and
click the appropriate link in the Certification column.
+12
-12
0.01
0.0
0.04
0.0
Electromagnetic Compatibility
Physical
This product is designed to meet the requirements of the following
standards of EMC for electrical equipment for measurement, control,
and laboratory use:
Board dimensions ............................... 2-slot 3U PXI Express module
Slot requirements ............................... 1 system slot plus 1 controller
expansion slot (to the left of the
system slot)
• EN 61326 EMC requirements; Minimum Immunity
• EN 55011 Emissions; Group 1, Class A
• CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A
Compatibility....................................... Fully compatible with
PXI specification
Weight................................................. 0.82 kg (1.8 lb) typical
Note: For EMC compliance, operate this device according to
product documentation.
Operating Environment
Ambient temperature range1 .............. 5 to 50 °C2, 3 (tested in
accordance with IEC-60068-2-1
CE Compliance
This product meets the essential requirements of applicable European
Directives, as amended for CE marking, as follows:
and IEC-60068-2-2)
Relative humidity range...................... 10 to 90%, noncondensing
(tested in accordance with
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
IEC-60068-2-56)
1 For chassis not available in the online catalog at ni.com, please contact National
Instruments for supported operating temperatures.
Note: Refer to the Declaration of Conformity (DoC) for this product for
any additional regulatory compliance information. To obtain the DoC for
this product, visit ni.com/certification, search by model number or
product line, and click the appropriate link in the Certification column.
2 5 to 50 °C for NI PXI-1036 Revision D and later, and NI PXI-1036DC Revision C and later.
3 5 to 40 °C for NI PXI-1036 revisions B and C and NI PXI-1036DC Revision B.
Storage Environment
Waste Electrical and Electronic Equipment (WEEE)
Ambient temperature range ............... -40 to 65 °C (tested in
EU Customers: At the end of their life cycle, all products must be
sent to a WEEE recycling center. For more information about WEEE
recycling centers and National Instruments WEEE initiatives,
visit ni.com/environment/weee.htm.
accordance with IEC-60068-2-1
and IEC-60068-2-2)
Relative humidity range...................... 5 to 95% noncondensing
(tested in accordance with
IEC-60068-2-56)
Shock and Vibration
Operating shock .................................. 30 g peak, half-sine, 11 ms pulse
(tested in accordance with
IEC-60068-2-27; test profile
developed in accordance
with MIL-PRF-28800F)
BUY ONLINE a t ni.com o r CALL 800 813 3693 (U.S.)
3
