PXI/DAQ/DAQe-2000 Series
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling Multi-Function DAQ Cards
Introduction
ADLINK's PXI/DAQ/DAQe-2000 series of products are simultaneous-sampling multi-function
DAQ cards to meet a wide range of application requirements. The devices can simultaneously
sample 4 AI channels with differential input configurations in order to achieve maximum noise
elimination. They also provide 2-CH 12-bit analog outputs with waveform generation capability,
which can be performed together with analog input functions. If more analog input or output
channels are required, multiple cards can be synchronized through the SSI (System Synchronization
Interface) bus. This makes the PXI/DAQ/DAQe-2000 series ideal for stimulus/response testing.
DAQ-2010
DAQe-2010
The PXI/DAQ/DAQe-2000 series also features analog and digital triggering, 24-CH programmable
digital I/O lines, and 2-CH 16-bit general-purpose timer/counter. The auto-calibration functions
adjust the gain and offset to within specified accuracies such that you do not have to adjust
trimpots to calibrate the cards.
PXI-2010
Pin Assignment
Features
Terminal Boards & Cables
■ꢀDIN-68S-01
■
Connector Pin Assignment
Supports a 32-bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
x1 lane PCI Express® Interface (DAQe-2000 series)
PXI specification Rev. 2.2 compliant (PXI-2000 series)
4-CH differential analog inputs
■
■
■
■
■
■
■
ꢀ
Terminal Board with One 68-pin SCSI-II
Connector and DIN-Rail Mounting (Cables are not
included.)
CH0+
CH1+
1
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
CH0-
2
CH1-
Bipolar or unipolar analog input ranges
Programmable gains of x1, x2, x4, x8
CH2+
3
CH2-
■ꢀACL-10568-1
CH3+
4
CH3-
ꢀ
68-pin SCSI-VHDCI cable (mating with
AMP-787082-7), 1 M
Scatter-gather DMA for both analog inputs and outputs
2-CH 12-bit multiplying analog outputs with waveform
generation
EXTATRIG
DA1OUT
DA0OUT
AOEXTREF
SDI3_1 / NC*
SDI2_1 / NC*
SDI1_1 / NC*
SDI0_1 / NC*
AO_TRIG_OUT
AI_TRIG_OUT
GPTC1_SRC
GPTC0_SRC
GPTC0_GATE
GPTC0_OUT
GPTC0_UPDOWN
EXTTIMEBASE
AFI1
5
AIGND
AOGND
AOGND
AOGND
SDI3_0 / NC*
SDI2_0 / NC*
SDI1_0 / NC*
SDI0_0 / NC*
EXTWFTRG
EXTDTRIG
DGND
6
* For more information on mating cables, please refer to
P2-61/62.
7
■
■
■
■
■
24-CH TTL digital input/output
8
2-CH 16-bit general-purpose timer/counter
Analog and digital triggering
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Fully auto calibration
Multiple cards synchronization through SSI (System
Synchronization Interface) bus or PXI trigger bus
■ꢀOperating Systems
ꢀ
ꢀ
•ꢀWindows 7/Vista/XP/2000/2003 Server
•ꢀLinux
DGND
Terminal board DIN-68S-01 &
■ꢀRecommended Software
68-Pin SCSI-VHDCI cable ACL-10568-1
GPTC1_GATE
GPTC1_OUT
GPTC1_UPDOWN
DGND
ꢀ
ꢀ
ꢀ
•ꢀAD-Logger
•ꢀVB.NET/VC.NET/VB/VC++/BCB/Delphi
•ꢀDAQBench
SSI Bus Cables
(for multiple cards synchronization)
AFI0
■ꢀDriver Support
■ꢀACL-SSI-2/3/4
PB7
PB6
ꢀ
ꢀ
ꢀ
ꢀ
•ꢀDAQPilot for LabVIEW™
•ꢀDAQ-MTLB for MATLAB®
•ꢀD2K-DASK for Windows
•ꢀD2K-DASK/X for Linux
ꢀ
SSI Bus cable for two, three, and four devices
PB5
PB4
PB3
PB2
PB1
PB0
PC7
PC6
PC5
PC4
DGND
DGND
PC3
PC2
PC1
PC0
PA7
PA6
SSI bus cable for multiple card synchronization
(for DAQ/DAQe-2000 series)
PA5
PA4
PA3
PA2
PA1
PA0
*Pin 9-12 and pin 43-46 are SDI<0..3>_n
for 2010; NC for 2005, and 2006
2-13
www.adlinktech.com
