ZXTP19020DFF
Definitions
Product change
Zetex Sem iconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Custom ers are solely responsible for obtaining the latest relevant inform ation before placing orders.
Applications disclaim er
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and m eets with the user’s requirem ents. No representation or warranty is given and no liability whatsoever is
assum ed by Zetex with respect to the accuracy or use of such inform ation, or infringem ent of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assum e any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any dam ages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circum stances.
Life support
Zetex products are specifically not authorized for use as critical com ponents in life support devices or system s without the express written
approval of the Chief Executive Officer of Zetex Sem iconductors plc. As used herein:
A. Life support devices or system s are devices or system s which:
1. are intended to im plant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical com ponent is any com ponent in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline inform ation only which (unless agreed by the
com pany in writing) m ay not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Term s and Conditions
All products are sold subjects to Zetex’ term s and conditions of sale, and this disclaim er (save in the event of a conflict between the two
when the term s of the contract shall prevail) according to region, supplied at the tim e of order acknowledgem ent.
For the latest inform ation on technology, delivery term s and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified sem iconductor m anufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Sem iconductors or one of our
regionally authorized distributors. For a com plete listing of authorized distributors please visit: w w w.zetex.com / salesnetw ork
Zetex Sem iconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Sem iconductor devices are susceptible to dam age by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible dam age to devices depends on the circum stances of the handling and transporting, and the nature of the device. The extent
of dam age can vary from im m ediate functional or param etric m alfunction to degradation of function or perform ance in use over tim e.
Devices suspected of being affected should be replaced.
Green com pliance
Zetex Sem iconductors is com m itted to environm ental excellence in all aspects of its operations which includes m eeting or exceeding reg-
ulatory requirem ents with respect to the use of hazardous substances. Num erous successful program s have been im plem ented to reduce
the use of hazardous substances and/or em issions.
All Zetex com ponents are com pliant with the RoHS directive, and through this it is supporting its custom ers in their com pliance with
WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at som e point. Sam ples m ay be available
Product status recom m ended for new designs
“Active”
“Last tim e buy (LTB)”
Device will be discontinued and last tim e buy period and delivery is in effect
“Not recom m ended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional inform ation, which
m ay change in any m anner without notice.
“Provisional version”
“Issue”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated perform ance.
However, changes to the test conditions and specifications m ay occur, at any tim e and without notice.
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications m ay occur, at any tim e and without notice.
Zetex sales offices
Europe
Am ericas
Asia Pacific
Corporate Headquarters
Zetex Gm bH
Kusterm ann-park
Balanstraß e 59
D-81541 München
Germ any
Zetex Inc
Zetex (Asia Ltd)
Zetex Sem iconductors plc
Zetex Technology Park, Chadderton
Oldham , OL9 9LL
700 Veterans Mem orial Highway
Hauppauge, NY 11788
USA
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
United Kingdom
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
europe.sales@zetex.com
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
usa.sales@zetex.com
Telephone: (852) 26100 611
Fax: (852) 24250 494
asia.sales@zetex.com
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
hq@zetex.com
© 2007 Published by Zetex Sem iconductors plc
Issue 1 - Septem ber 2007
© Zetex Sem iconductors plc 2007
8
w w w.zetex.com
