M1S Series 5.0 Volt HCMOS/TTL
CompatibleOscillators
M1S Series 5.0 Volt HCMOS/TTL Compatible
Ceramic Package Surface Mount Oscillators
Features grounded lid for reduced EMI.
This product is available in both 5.0 V (M1S)
and 3.3 V (M2S).
RECOMMENDATION:
Unless board height (.185 vs. .140) is a concern,
M-tron recommends the M7S series.
See page 79.
Available Stabilities vs. Temperature
A = Available
N = Not Available
S = Standard
C = Consult Factory
Electrical Specifications
Pin Connections
Tri-state Control Logic
Pin 1 high or floating: clock signal output.
Pin 1 low: output disabled to high impedance.
1 TTL load - See load circuit diagram #1 on page 137. HCMOS load - See load circuit diagram #2 on page 137.
2 Symmetry is measured at 1.4 V with TTL load and at 50% Vdd with HCMOS load.
3 Rise/Fall times are measured between 0.5 V and 2.4 V with TTL load, and between 10% Vdd and 90% Vdd
with HCMOS load.
See page 136, Figure 2 for suggested solder profile.
64
