Maximum Ratings at TA = 25°CNotes 1&3
DCꢀForwardꢀCurrent
CxxxEZ290-Sxx00-2
50ꢀmA
PeakꢀForwardꢀCurrentꢀ(1/10ꢀdutyꢀcycleꢀ@ꢀ1ꢀkHz)
LEDꢀJunctionꢀTemperature
100ꢀmA
125°C
ReverseꢀVoltage
5ꢀV
OperatingꢀTemperatureꢀRange
-40°Cꢀtoꢀ+100°C
-40°Cꢀtoꢀ+100°C
1000ꢀV
StorageꢀTemperatureꢀRange
ElectrostaticꢀDischargeꢀThresholdꢀ(HBM)ꢀNoteꢀ2
ElectrostaticꢀDischargeꢀClassificationꢀ(MIL-STD-883E)ꢀNoteꢀ2
Classꢀ2
Note 3
Typical Electrical/Optical Characteristics at TA = 25°C, If = 20 mA
Reverse Current
[I(Vr=5V), μA]
Full Width Half Max
Part Number
Forward Voltage (Vf, V)
(λD, nm)
Min.
Typ.
3.1
Max.
Max.
Typ.
21
C460EZ290-Sxx00-2
C470EZ290-Sxx00-2
C527EZ290-Sxx00-2
2.7
2.7
2.9
3.7
3.7
3.9
2
2
2
3.1
22
3.2
35
Mechanical Specifications
Description
CxxxEZ290-Sxx00-2
Dimension
Tolerance
±ꢀ25
P-NꢀJunctionꢀAreaꢀ(μm)
TopꢀAreaꢀ(μm)
226ꢀxꢀ226
280ꢀxꢀ280
280ꢀxꢀ280
170
±ꢀ25
BottomꢀAreaꢀ(μm)
±ꢀ25
ChipꢀThicknessꢀ(μm)
±ꢀ25
AuꢀBondꢀPadꢀDiameterꢀ(μm)
AuꢀBondꢀPadꢀThicknessꢀ(μm)
BackꢀContactꢀMetalꢀAreaꢀ(μm)
BackꢀContactꢀMetalꢀThicknessꢀ(μm)ꢀNoteꢀ4
100
-15,ꢀ+5
±ꢀ1.0
±ꢀ25
3.0
280ꢀxꢀ280
3.0
±ꢀ0.3
Notes:
1.ꢀ Maximumꢀ ratingsꢀ areꢀ packageꢀ dependent.ꢀ Theꢀ aboveꢀ ratingsꢀ wereꢀ determinedꢀ usingꢀ aꢀ T-1ꢀ 3/4ꢀ packageꢀ (withꢀ Hysolꢀ OS4000ꢀ
epoxy)ꢀforꢀcharacterization.ꢀRatingsꢀforꢀotherꢀpackagesꢀmayꢀdiffer.ꢀTheꢀforwardꢀcurrentsꢀ(DCꢀandꢀPeak)ꢀareꢀnotꢀlimitedꢀbyꢀtheꢀdieꢀ
butꢀbyꢀtheꢀeffectꢀofꢀtheꢀLEDꢀjunctionꢀtemperatureꢀonꢀtheꢀpackage.ꢀTheꢀjunctionꢀtemperatureꢀlimitꢀofꢀ125°CꢀisꢀaꢀlimitꢀofꢀtheꢀT-1ꢀ
3/4ꢀpackage;ꢀjunctionꢀtemperatureꢀshouldꢀbeꢀcharacterizedꢀinꢀaꢀspecificꢀpackageꢀtoꢀdetermineꢀlimitations.ꢀAssemblyꢀprocessingꢀ
temperatureꢀmustꢀnotꢀexceedꢀ325°Cꢀ(<5ꢀseconds).ꢀꢀSeeꢀCreeꢀEZBrightꢀApplicationsꢀNoteꢀforꢀassemblyꢀprocessꢀinformation.
2.ꢀ Productꢀresistanceꢀtoꢀelectrostaticꢀdischargeꢀ(ESD)ꢀaccordingꢀtoꢀtheꢀHBMꢀisꢀmeasuredꢀbyꢀsimulatingꢀESDꢀusingꢀaꢀrapidꢀavalancheꢀ
energyꢀtestꢀ(RAET).ꢀTheꢀRAETꢀproceduresꢀareꢀdesignedꢀtoꢀapproximateꢀtheꢀmaximumꢀESDꢀratingsꢀshown.ꢀTheꢀRAETꢀprocedureꢀisꢀ
performedꢀonꢀeachꢀdie.ꢀTheꢀESDꢀclassificationꢀofꢀClassꢀ2ꢀisꢀbasedꢀonꢀsampleꢀtestingꢀaccordingꢀtoꢀMIL-STD-883E.
3.ꢀ Allꢀproductsꢀconformꢀtoꢀtheꢀlistedꢀminimumꢀandꢀmaximumꢀspecificationsꢀforꢀelectricalꢀandꢀopticalꢀcharacteristicsꢀwhenꢀassembledꢀ
andꢀoperatedꢀatꢀ20ꢀmAꢀwithinꢀtheꢀmaximumꢀratingsꢀshownꢀabove.ꢀEfficiencyꢀdecreasesꢀatꢀhigherꢀcurrents.ꢀTypicalꢀvaluesꢀgivenꢀ
areꢀwithinꢀtheꢀrangeꢀofꢀaverageꢀvaluesꢀexpectedꢀbyꢀmanufacturerꢀinꢀlargeꢀquantitiesꢀandꢀareꢀprovidedꢀforꢀinformationꢀonly.ꢀAllꢀ
measurementsꢀwereꢀmadeꢀusingꢀlampsꢀinꢀT-1ꢀ3/4ꢀpackagesꢀ(withꢀHysolꢀOS4000ꢀepoxy).ꢀOpticalꢀcharacteristicsꢀmeasuredꢀinꢀanꢀ
integratingꢀsphereꢀusingꢀIlluminanceꢀE.
4.ꢀ Specificationsꢀareꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.
Cree,ꢀInc.
Copyrightꢀ©ꢀ2010ꢀCree,ꢀInc.ꢀAllꢀrightsꢀreserved.ꢀTheꢀinformationꢀinꢀthisꢀdocumentꢀisꢀsubjectꢀtoꢀchangeꢀwithoutꢀnotice.ꢀCree,ꢀtheꢀCreeꢀ
4600ꢀSiliconꢀDrive
logoꢀandꢀEZBrightꢀareꢀregisteredꢀtrademarks,ꢀandꢀEZ,ꢀEZ290,ꢀEZ-08,ꢀEZ-18ꢀandꢀEZ-21ꢀareꢀtrademarksꢀofꢀCree,ꢀInc.ꢀ
Durham,ꢀNCꢀ27703
USAꢀTel:ꢀ+1.919.313.5300
www.cree.com
2
CPR3EJ Rev -
