Optimal I Star Series
1-watt LED on MCPCB
OVTLZ1LGAxx
xꢀ Customized for Optek Lednium Series 1-watt device
xꢀ Low thermal resistance (4.9° C/W junction to heatsink)
xꢀ Exceptional thermal conductivity with metal core PCB
xꢀ Soldering points provided for electrical connections
xꢀ Locating slots for M3 screws
Product Photo Here
Typical Luminous Typical Forward Voltage (V)
Part Number
Viewing Angle
Emitted Color
Flux (lm)
@ 350mA
Blue 460nm
Cyan 505nm
12
3.4
OVTLZ1LGAB
OVTLZ1LGAC
OVTLZ1LGAG
OVTLZ1LGAR
OVTLZ1LGAA
OVTLZ1LGAW
OVTLZ1LGAWD
OVTLZ1LGAWW
40
3.6
Green 515nm
60
3.6
Red 625nm
45
2.3
135°
Amber 595nm
35
2.3
Cool White 7000K
Daylight White 5800K
Warm White 3500K
65
3.4
60
3.4
50
3.4
Package Dimensions
Notes:
xꢀ Test conditions: IF=350mA; TJ<130°C
xꢀ All dimensions are in inches [millimeters].
xꢀ Additional thermal management required.
xꢀ Packaged in ESD shielded tube, 10 units per tube
xꢀ Two pads available for each polarity
xꢀ All electrical and optical characteristics of the LED remain the
same as specified by the corresponding datasheet
(OVTL01LGA Series).
RoHS
Moisture
DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A.5 05/08
Page 1 of 1
