ꢀꢁꢀ9ꢂ0LQLDWXUL]HGꢂ+LJKꢂWHPSHUDWXUHꢂ&DSDFLWRUV
®
ELECTRIC DOUBLE LAYER CAPACITORS “DYNACAP” DXJ
*5((1
&$3
ꢃꢀ℃
●
●
●
High temperature type of Series DX.
5mm tall. Max. thin profile (H-shaped).
Miniaturized but can encase up to 0.33F in 11.5
×5mm case,
+LJKꢀWHPSHUDWXUH
and 1.0F in 19.0×20.5mm case.
';-
';
Marking color : White print on a black sleeve
Specifications
Item
Performance
ー10 to ＋85
ー20 to ＋80
Category temperature range (℃)
Tolerance at rated capacitance (%)
Rated capacitance (F)
0.047
200
0.1
0.22
150
0.33
150
1.0
75
Internal resistance
at 1 kHz
Internal resistance (Ω)
150
Percentage of capacitance change
Internal resistance
Within ±30% of the value at 20℃
Characteristics at high
and low temperature
Within four times of the initial specified value
Test time
1000 hours
Endurance (85℃)
Percentage of capacitance change
Internal resistance
Within ±30% of the initial measured value
Less than four times of the initial specified value
Shelf life (85℃)
Test time : 1000 hours ; Same as endurance.
Applicable standards
Conforms to JIS C5160-1 2009 (IEC 62391-1 2006)
2XWOLQHꢀ'UDZLQJ
Unit : mm
(4.5)
Terminal shaped : V
φD±0.3
Terminal shaped : H
12.4±0.5
φD±0.3
Sleeve
Sn＋Cu plated
Sleeve
Sn＋Cu plated
（0.15）
10.0±0.5
（0.15）
5.0±0.5
(0.8)
(φ11.5 : 0.8, φ19ꢀ: 1.0)
1RWH
Part numbering system (example : 5.5V0.1F)
Do not apply external force to products or terminals as stress such as twisting,
bending, pushing, or falling of such products or terminals may remove the terminals,
resulting in an open/short circuit or liquid leakage.
Avoid applying excessive heat to capacitors during heating of an adhesive curing oven.
For details, refer to the precautions in use of DYNACAP.
DXJ
̶
5R5
Rated voltage
symbol
104
U
Terminal
shaped
Rated Capacitance
Series code
symbol
Part number is refer to below table.
Standard Ratings
Max. operating voltage (V)
Rated capacitance (F)
ELNA Parts No.
DXJ-5R5V473U
φD×L (mm)
11.5×13.0
5.5
5.5
5.5
0.047
DXJ-5R5H473U
DXJ-5R5V104U
DXJ-5R5H104U
DXJ-5R5V224U
DXJ-5R5H224U
DXJ-5R5V334U
DXJ-5R5H334U
DXJ-5R5V105U
11.5× 5.0
11.5×13.0
11.5× 5.0
11.5×13.0
11.5× 5.0
11.5×13.0
11.5× 5.0
19.0×20.5
0.1
0.22
5.5
5.5
0.33
1.0
NOTE
Design, Specifications are subject to change without notice.
193
CAT.No.2013/2014E
Ask factory for technical specifications before purchase and/or use.
