EXTREME
TAEDMVPAERNACTUEDREENGINEERING
Technical Data Sheet
Technical Data Sheet
ABRASION
FLAMMABILITY
Rating ______________ Non Flammable
Abrasion Resistance
High
Intermitten Exposure
750°F (399°C)
Abrasion Test Machine
Taber 5150
Maximum Continuous
Mil-I-23053
400°F (204.4°C)
Abrasion Test Wheel
Calibrase H-18
CHEMICAL
Minimum Continuous
RESISTANCE
Abrasion Test Load
500g
-40°F (-40°C)
1=No Effect
4=More Affected
2=Little Effect 5=Severely Affected
3=Affected
PHYSICAL
Room Temperature
77°F
PROPERTIES
Humidity
70%
Aromatic Solvents ________________ 1
Aliphatic Solvents_________________ 1
Chlorinated Solvents ______________ 1
Weak Bases ______________________ 1
Salts____________________________ 1
Strong Bases _____________________ 1
Salt Water 0-S-1926________________ 1
Hydraulic Fluid MIL-H-5606 _________ 1
Lube Oil MIL-L-7808 _______________ 1
De-Icing Fluid MIL-A-8243 __________ 1
Strong Acids _____________________ 2
Strong Oxidants __________________ 2
Esters/Ketones ___________________ 1
UV Light ________________________ 1
Petroleum _______________________ 1
Fungus ASTM G-21 ________________ 1
Monofilament Diameter__________NA
ASTM D-204
Flammability Rating __ Non Flammable
Recommended Cutting __Scissor/Shears
Colors _________________________ 1
Wall Thickness_________________ .04”
Material Destroyed -
Two Small Holes Worn
Through
1,060 Test Cycles
Pre-Test Weight
7,857.40 mg
Post-Test Weight
6,602.20 mg
Test End Loss Of Mass
Point Of Destruction
1,255.20 mg
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms
of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
08-26
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
