https://www.phoenixcontact.com/us/products/1918939
Printed-circuit board connector - MC 1,5/10-ST-3,5 BD:1-10 - 1918939
Technical data
General
Nominal current IN
8 A
Nominal cross section
Maximum load current
Insulating material
1.5 mm²
8 A (with 1.5 mm² conductor cross section)
PA
Flammability rating according to UL 94
Internal cylindrical gage
Stripping length
V0
A1
7 mm
M2
Screw thread
Tightening torque, min
Tightening torque max
0.22 Nm
0.25 Nm
Connection data
Conductor cross section solid min.
0.14 mm²
1.5 mm²
0.14 mm²
1.5 mm²
0.25 mm²
1.5 mm²
0.25 mm²
0.5 mm²
28
Conductor cross section solid max.
Conductor cross section flexible min.
Conductor cross section flexible max.
Conductor cross section flexible, with ferrule without plastic sleeve min.
Conductor cross section flexible, with ferrule without plastic sleeve max.
Conductor cross section flexible, with ferrule with plastic sleeve min.
Conductor cross section flexible, with ferrule with plastic sleeve max.
Conductor cross section AWG min.
Conductor cross section AWG max.
16
2 conductors with same cross section, solid min.
2 conductors with same cross section, solid max.
2 conductors with same cross section, stranded min.
2 conductors with same cross section, stranded max.
0.08 mm²
0.5 mm²
0.08 mm²
0.75 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
0.34 mm²
0.5 mm²
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max.
Minimum AWG according to UL/CUL
Maximum AWG according to UL/CUL
30
14
Standards and Regulations
Connection in acc. with standard
EN-VDE
CSA
04/06/2017 Page 2 / 4
