solutions
MAXIMUM
Mill-Max Offers Horizontal SMT
Spring Pin and Target Pin Mate
Mill-Max’s 0967 is a low profile, horizontal, surface mount spring pin designed for edge board interface appli-
cations: board-to-board or device-to-board. Whereas most spring pins are designed to mount vertically on a P.C.
board, the 0967 mounts parallel to the P.C. board so that the plunger travel is horizontal to the board surface.
The above board height of .100” (2.54 mm) provides a low profile for tight packaging requirements. Typically
mounted on the edge of the pc board, it can be mated with a board running perpendicular to it, or parallel P.C.
boards can be daisy-chained together by using the Mill-Max 7937 horizontal SMT target pin and 0967 on
opposing boards.
The 7937 provides an area approximately .100” (2.54 mm) high by .155” (3.94 mm) long for the plunger of the
0967 to mate with – more than ample to ensure a highly reliable interconnect.
7937-0-00-15-00-00-03-0
0967-0-15-20-75-14-11-0
• .100” (2.54 mm) low-profile
• Rated at 2A continuous, 3A peak
• 60 grams of force @ .0275” (0,7mm) mid-stroke
• Durability: 1 million cycles
• Same .100” (2.54 mm) low profile as Mill-Max 0967
• Plated 10µ” gold over nickel
• Available on Tape & Reel
• Available on Tape & Reel
For more information, please visit: www.mill-max.com/PR616.
(3/11 -- 616)
R
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, Oyster Bay, NY 11771-0300
516-922-6000 • Fax: 516-922-9253 • www.mill-max.com
Maximum Interconnect Solutions
