ESD Suppressor
■ Ratings
Type
(inch size)
EZAEG1A (0201)
Clamping
Voltage(3)
Capacitance(1)
Peak Voltage(2)
Rated Voltage Category Temperature Range
+0.04
0.04
0.05
0.10
pF
pF
pF
–0.03
500 V max.
(350 V typ.)
+0.05
–0.04
EZAEG2A (0402)
EZAEG3A (0603)
100 V max.
30 V max
–55 to +125 °C
+0.10
–0.08
(1) Capacitance = The capacitance value shall be measured under the conditions specified below.
Frequency : 1 MHz 10 %, Voltage : 1 Vrms 0.2 Vrms, Temperature : 25 °C 2 °C
(2) Peak Voltage = The peak voltage value shall be measured under the following conditions. ESD test conditions : IEC61000-4-2, 8 kV contact discharge
(3) Clamping Voltage = The clamping voltage value shall be measured at 30 ns after initiation of pulse and measured under the conditions specified below.
ESD test conditions : IEC61000-4-2, 8 kV contact discharge
■ Frequency Characteristics
■ ESD Suppression Voltage Waveform
5
0
400
350
300
250
200
150
100
50
-5
-10
-15
-20
-25
-30
0
-50
-20
0
20 40 60 80 100 120 140 160 180 200
Times (nSecs)
1
10
100
1000
10000
Frequency(MHz)
■ Typical Circuits Requiring Protection
● HDMI circuit
● Antenna circuit
Antenna
HDMI Controller
Ga/As-SW
or
ASM
)%.*
3Yꢀ5Y
■ Recommended Land Pattern
Recommended land pattern design for ESD Suppressor is shown below.
Dimensions (mm)
Type
(inch size)
ESD Suppressor
a
b
c
EZAEG1A
(0201)
0.3 to 0.4
0.8 to 0.9 0.25 to 0.35
EZAEG2A
(0402)
EZAEG3A
(0603)
0.5 to 0.6
0.7 to 0.9
1.4 to 1.6
2.0 to 2.2
0.4 to 0.6
0.8 to 1.0
a
b
■ Packaging Methods, Soldering Conditions and Safety Precautions
Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2012
41
