OZ100SG
Typical HV Opto-Coupler Configuration
LEDs placed in close proximity
to opto-diode.
•
•
Gain of configuration is determined by:
IOPTO
x
100%
ILED
Gain is dependent on:
•
Distance (d) of LEDs from opto-diode.
•
Wavelength of LED light (λLED).
•
Intensity of LED light (Φ ).
•
•
e
Optical properites of medium
between LEDs and opto-diode.
λLED = 890 nm, Φe min = 50 mW/sr
λLED = 940 nm, Φe min = 40 mW/sr
GAIN VS. DISTANCE
GAIN VS. DISTANCE
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0.000
0.050
Distance (d inches)
0.100
Distance (inches)
0.150
0.000
0.050
Distance (d inches)
Distance (inches)
0.100
0.150
Both configurations use VOPTO = 10kV and two LEDs
Dimensions: In. (mm)
All temperatures are ambient unless otherwise noted.
Data subject to change without notice.
Tel:
Fax:
www.voltagemultipliers.com
www.highvoltagepowersupplies.com
559.651.1402
559.651.0740
Voltage Multipliers Inc.
8711 W. Roosevelt Ave.
Visalia, CA 93291 USA
2
