TEK 100-300 Series Literature 29/5/01 8:33 am Page 2
SPECIFICATION
SWITCH MODE
DESCRIPTION
POWER SUPPLIES
100-300 WATTS
The TEK Series Switch Mode Power Supplies are available in single, dual, triple and quad output
models and provide output power from 100 to 300 watts. All TEK Series Switchers are low profile and
are available in an open-frame or covered configuration. The TEK Series is an ideal choice and a
powerful solution for any application where up to 300 watts may be required.
SPECIFICATION
TEK 100-300 SERIES
AC Input Specifications
Input Voltage:
TEK100, 90-264V AC
TEK200/300, 90-132/180-264V AC
47-63 Hz.
(Cold Start): 40A (max)@115V AC, 80A (max)@230V AC
70% Typical @ Full Load
Input Frequency:
Inrush Current:
Efficiency:
DC Output Specifications
Output Voltage:
Voltage Adjust:
See Model Chart
Main output(V1) +/-5% of rated output.
See Model Chart
Output Current:
Output Power(Watts):
See Model Chart
Line/Load Regulation Max.: +/-5%
Ripple and Noise:
Turn-On Delay:
Hold-up Time:
+/-1% p-p
1 sec. max.@120V AC
20ms @ 120V AC and 80% of rated load.
Not to exceed 5% over nominal voltage
Overshoot:
Step Load Response
The TEK 100/200/300:
With a 20% dynamic load change the output will vary <=3%.
Recovery is within the 1% regulation window within 300µS.
Environmental Conditions
Operating Temp.:
Temperature Coefficient:
Storage Temp.:
0-40°C. For operation above 40 °C, derate 2.5% per °C.
0.1% per °C max.
-20 to 85 °C.
TEK200&300 require 22CFM to operate at full load.
5%-95% RH, non-condensing.
5%-95% RH, non-condensing.
Cooling:
Operating Humidity:
Storage Humidity:
Vibration:
Frequency 5 to 50 Hz, Acceleration +/-7.35M/(SxS) on X,Y,Z axis.
Safety Specification
Safety:
Emissions:
Leakage:
UL, cUL, CE, TUV, VDE
FCC Part 15 subject J, Class B, CISPR 22 Class B
AC leakage current shall not exceed 5mA when the power
supply is connected to a supply voltage equal to the upper
limit of the rated voltage range.
MODEL NUMBERS AND OUTPUT RATINGS
TEK100Series
Model
Output V1
Output V2
Output V3
Output V4
Number
Voltage Current Voltage Current Voltage Current Voltage Current
TEK100S01 5V 20A (30APK)
TEK100S02 12V 8.5A (12A PK)
TEK100S03 15V 6.5A (10A PK)
TEK100S04 24V 4.5A (8A PK)
TEK100S09 48V 2A (3A PK)
TEK100D12 5V 10A (15A PK) 12V 5A (9A PK)
TEK100D13 5V 10A (15A PK) 15V 4A (6A PK)
TEK100D14 5V 10A (15A PK) 24V 2.5A (6A PK)
TEK100T16 5V 10A (15A PK) 12V 5A (9A PK)
TEK100T17 5V 10A (15A PK) 15V 4A (6A PK)
TEK100Q56 5V 10A (15A PK) 12V 5A (9APK)
TEK100Q57 5V 10A (15A PK) 15V 4A (6A PK)
TEK100Q86 5V 10A (15A PK) 24V 2A (3A PK)
12V 0.5A (1A PK)
15V 0.5A (1A PK)
12V 0.5A (1A PK) 5V 0.5A (1A PK)
15V 0.5A (1A PK) 5V 0.5A (1A PK)
12V 0.5A (1A PK) 12V 0.5A (1A PK)
Note: All peak surge currents are less than 30ms and less than 50% duty cycle.
